Organic Vapour Cartridge 2/pk

The 3M Organic Vapor Cartridge 6001 helps provide organic vapor protection in a variety of environments. Recommended applications for the cartridge include assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating. Industries in which this cartridge is commonly used include chemicals, construction, oil and gas, and transportation. This organic vapor cartridge works with 3M Reusable Respirator Half and Full Facepieces 6000, 7000 and FF-400 Series with bayonet holders. When properly selected fitted, use in a variety of applications such as grinding, sanding and welding for concentrations up to 10 times the OSHA Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces when quantatively fit tested. Warning: Respirators help protect against certain airborne contaminants. Before use, the wearer must read and understand the User Instructions provided as a part of the product packaging. Follow all local regulations. In the U.S., a written respiratory protection program must be implemented meeting all the requirements of OSHA 29 CFR 1910.134 including training, fit testing and medical evaluation. In Canada, CSA standards Z94.4 requirements must be met and/or requirements of the applicable jurisdiction, as appropriate. Misuse may result in sickness or death. For correct use, consult supervisor and User Instructions, or call 3M Personal Safety Division (PSD) Technical Service in the U.S.A. at 1-800-243-4630. In Canada, call 1-800-267-4414. Disclaimer: 3M industrial and occupational products are intended, labeled, and packaged for sale to trained industrial and occupational customers for workplace use. Unless specifically stated otherwise on the applicable product packaging or literature, these products are not intended, labeled, or packaged for sale to or use by consumers (e.g., for home, personal, primary or secondary school, recreational/sporting, or other uses not described in the applicable product packaging or literature), and must be selected and used in compliance with applicable health and safety regulations and standards (e.g., U.S. OSHA, ANSI), as well as all product literature, user instructions, warnings, and other limitations, and the user must take any action required under any recall, field action, or other product use notice. Misuse of 3M industrial and occupational products may result in injury, sickness, or death. For help with product selection and use, consult your on-site safety professional, industrial hygienist, or other subject matter expert.

Features:

• Assembly & Mechanical
• USE WITH 3M 5000 Series Respirators or 3M Gas and Vapor Cartridges 6000 Series (with Adaptor 502) which are approved for use with 3M Half Facepiece 6000, 6500 and 7500 Series or 3M Full Facepiece 6000, FF-400 or 7800S Series
• Batch-charging
• Change-over
• LOW PROFILE design helps maintain good field of vision
• Chemical Clean-up
• VARIETY OF USES: Assembly and mechanical, batch-charging, change-overs, chemical dispensing, clean-up, cleaning, painting, parts cleaning, and seal coating
• Chemical Dispensing
• EASY TWIST ON AND OFF: Bayonet connection twist on and off easily for quick assembly and disassembly with many 3M half and full facepiece designs
• For industrial/occupational use only. Not for consumer sale or use
• Clean-up
• Cleaning
• Composite Finishing
• Final Finish
• Maintenance
• Paint Preparation
• Painting
• Parts Cleaning
• Seal Coatings